When we mention cone crushers, people often think about CS series cone crushers. But Shanghai Shunky's cone crushers include not only the CS series, but also SKH hydraulic cone crushers, PY series cone crushers. Then let's talk about what we often see——CS series cone crushers, which are also called spring cone crushers. Now let us see the features.

Shanghai Shunky's CS series cone crushers's upper part is installed the rotating feeding device which feeds uniform materials. The crushing chamber is large in the upper part, stair-stepping in the middle and short in the lower parallel zone. The length of the parallel zone is very short, and the bevel is less than the rest angle, so the upper crushing zone of the crushing chamber can filled with a very thick layer of material. When the crusher work, the rapid movement of the materials in the chamber caused by the crushing cone's impact, will cause the squeeze and crushing between particles. At the same time, because the mutual displacement between particles, particles can also be crushed. The bevel at the lower part of the crushing cone is small, so materials in the paralleling zone of the crushing chamber area not to decline and the smaller ones are discharged with lower speed based on the swing of crushing cone. These declined materials are distributed to the paralleling zone and form another particles in the next impact. This processing state continues to repeat. The discharge's width does not mean the particle size of the product. The width of the discharge is usually 6-13 mm, and the product size is less than 7 mm, which is widely used in mineral processing industry.

CS series cone crushers have often appear in crushing lines and its superiority is obvious. Welcome to visit our company.